Home > Handguns >

Sig Sauer P226 Elite Nitron Night Sights 9mm
SIG SAUER P226 Elite Black Nitron 9mm Night Sights E26R-9-BSE
SIG SAUER P226 Elite Nitron Night Sights 9mm (E26R-9-BSE)

SIG SAUER P226 Elite Nitron Night Sights 9mm (E26R-9-BSE)
Retail $1,100.00
Our Price: $1,000.00
You save $100.00!

Availability: Currently Out of Stock
Product Code: E26R-9-BSE

Description Additional Information
Low prices on the Sig Sauer P226 Elite Night Sights 9mm start at Champion Firearms:

Service Auto Supreme. The Sig Sauer P226 is probably the best known for being used by specialist units including the SAS, not to mention many British Army units and the US Navy SEALs. It is a double-action semi-automatic pistol, originally chambered for the universal 9mm caliber. Mechanically speaking, there have been a number of significant improvements to the Sig Sauer P226 over the years.

Original contract models were supplied with phosphate or nickel-plated internal parts. The P226 started out utilizing a two-piece breech-block roll-pin system, but now incorporates a solid stainless steel pin. In 1996, once production shifted from Germany to the U.S.A., Sig Sauer started manufacturing the P226 with a slide machined from stainless steel bar stock.

These slides were much stronger, heavier duty and allowed the pistol to be chambered in the more powerful cartridges. In addition, the slide velocity and recoil were tamed by the increased mass of the CNC machined slide.
This is a short-recoil operated pistol that has a traditional double action/single action (DA/SA) firing system.

It carries a stainless steel slide that sits atop a machined, 7075-T6 lightweight aluminum frame which is black hard-coated over anodizing. The slide also houses an improved, large external extractor positioned at the right rear of the ejection port. A passive firing pin safety lies hidden within the slide, and 10 diagonal rear-charging grooves enable positive loading and unloading.

A rounded accessory rail on the dust cover allows the user to quickly install lights and lasers. The frontstrap features fine horizontal grooving. The P226 features a new grip contour that Sig Sauer refers to as "e2" (or Enhanced Ergonomics), meaning the circumferential measurements are dimensionally smaller than previous generations of pistols. These thinner stippled polymer grips provide a secure hold while firing the pistol.

To safely lower a raised hammer on the P226, shooters can easily employ a user friendly decocking lever located on the frame.
Unlike many other DA/SA pistols, Sig Sauer positions the hammer decocking lever where it can be depressed with the right thumb, without having to change your grip on the pistol. The slide stop is located just above the decocking lever, and can be manipulated easily.

Several built-in safety features make it suitable for concealed carry. The hammer is blocked from contacting the firing pin if dropped. It has a rebounding hammer design, and is blocked from moving forward unless the trigger is held to the rear. Also, the firing pin block prevents the firing pin from moving forward unless the trigger is held to the rear.

The Sig Sauer P226 weighs in at 34.0 ounces and has a black Nitron slide that is extremely corrosion plus wear resistant. In case you are unfamiliar with Nitron, this is Sig's term for the Ionbond finish that is administered at a specialty coating company's third party facility. Ionbond is a firearms finish that is applied through a Physical Vapor Deposition (PVD) process. This involves the depositing of diamond-like carbon coatings via a vacuum, and results in a finish that will provide years of protection against wear while retaining a nice appearance.

With a 4.4" barrel and a high capacity fifteen round magazine, the P226 has a double action trigger pull of around 10lbs., where single action subsequently resets to just 4.4lbs. The trigger system is the �SRT� style, which means short reset trigger. A set of SIGLITE Tritium 3- dot night sights sit on top of the slide, are highly visible, easy to use and track well.

For service or repair, the pistol is backed by a manufacturers lifetime warranty. Overall, the Sig Sauer P226 is accurate, dependable, safe, simple to operate and is made here in the U.S.A.
SIGLITE- Night Sights
E2 Polymer Grip- reduced circumference, one-piece modular with improved texture
Integral Tactical Rail
Unique Controlled Decocking Lever- frame mounted & precision controlled, it allows the hammer to be dropped down safely after loading
Rebound Hammer-automatically moves the hammer away from the firing pin when not being fired...even when the hammer is manually lowered without the decocking lever being engaged
Nitron Finish- corrosion resistant coat
Caliber: 9mm
Magazine Capacity: (2) 15- Round
Barrel: 4.4"
Action Type: Traditional Double
Weight: 34 ozs.
Slide: Steel w/ Black Nitron Finish
Frame: Aluminum Alloy w/ Black Hardcoat Finish
Trigger Pull: 10lb DA, 4.4lb SA
Warranty: Lifetime

Browse for more products in the same category as this item:

Handguns > Sig Sauer
Handguns > Sig Sauer > P226