 |
 |
 |
|
Low prices on the Ruger Super Redhawk Alaskan 2.5" .454Casull start at Champion Firearms-
Ruger's Hand Cannon. Sturm, Ruger and Company was founded in 1949 by business partners Alexander ("Alex") McCormick Sturm and William ("Bill") Batterman Ruger. Prior to the partnership, Bill Ruger had previously designed machine guns for the U.S. military during World War II and afterwards, successfully duplicated two Japanese Baby Nambu pistols in his garage based on samples acquired from a Marine.
It would serve as the basis for launching the company when Ruger ingeniously combined the looks of a German 9mm Luger with rimfire engineering from the Colt Woodsman and the operating mechanism of the Nambu. Bill Ruger and Alex Sturm rented a small machine shop in Southport, Connecticut and immediately introduced the world to the greatest rimfire pistol in history-- the legendary MK-I, which still continues to this day in its third generation.
Alex Sturm was married to the granddaughter of President Teddy Roosevelt, was a Yale graduate, a talented artist and business entrepreneur that supplied the capital investment to start the fledgling company. In addition, he personally designed the famous Germanic heraldic red eagle that still serves as Ruger's company logo.
Bill Ruger supplied the business acumen plus technical-know-how as a skilled gunsmith and celebrated inventor. Tragically in 1951, Alex Sturm fell seriously ill and died at the age of 28 just as the company was beginning to gain traction.
After Sturm's passing, Bill Ruger mourned the loss of his old friend and business partner by permanently changing the company's distinctive red eagle logo to solid black (or white, shrouded in black), where it remains to this day in remembrance. Bill Ruger would go on to lead the company to world prominence, becoming the largest manufacturer of firearms in the United States.
A pioneering legend in American industry until his death in 2002, Ruger had a hand in the design and styling of every single gun the company produced while under his direction. To date, Sturm Ruger has manufactured more than 30-million firearms, while also becoming a leading supplier of precision investment castings in diverse industries such as aerospace, automotive and even golf clubs.
In 1986, Bill Ruger made the decision to redesign the standard model Redhawk. This is a beast of a hunting handgun designed to take the most grueling punishment a big-bore magnum cartridge can dish out. Dubbed, the Super Redhawk Alaskan, the frame was extended to the end of the ejector rod housing.
It provided for longer threads on the barrel shank and an even more solid barrel-to-frame mount. The extended frame made it easy to incorporate a solid scope mount into the frame. Make no mistake, the Ruger Super Redhawk Alaskan is a heavy duty revolver not only due to its massive extended frame, but a 2.5" barrel as well.
They are built for years of hard use without ever wearing out. At the heart of the design is a solid frame with its massive cylinder lockup at the front, and also at the rear into the recoil plate of its heavy duty frame. Ruger refers to this as the "Triple Locking Cylinder".
The ejector rod does not rotate and will never unscrew itself from its fixed position, causing the gun the malfunction as seen in other manufacturer's designs. In addition, the cylinder bolt notches are slightly off center, making a stronger cylinder wall than revolver designs that place this cut directly over the center of each chamber.
Another design improvement was the reduced grip frame. Grip panels don't actually attach the side of the Super Redhawk Alaskan's frame as they do on traditional revolvers. Instead, a one-piece grip slides over the frame and is securely attached by screws through the bottom.
The Ruger frame is considered the strongest double action chassis available anywhere due to the fact it lacks removable side plates and investment cast construction. There is often a great deal of confusion between old school sand castings and Ruger's state-of-the-art advanced investment castings-- which are typically considered stronger than even forged steel.
Similarly, other revolver manufacturers use a removable side plate design that is over 100- years old. They were built to accommodate the low pressure loads of the era, but when the mega magnum cartridges like the .454Casull came along in 1957, no double action revolvers were strong enough to handle this beast. By the late '90s, Taurus built the Raging Bull that successfully chambered the .454, but the guns were exponentially enlarged to handle the higher pressure rounds.
Magnum revolvers that use side plates tend to loosen-up over time. Ruger's revolvers, on the other hand, have always been built without the use of side plates-- which result in a stronger, less bulky gun.
The Ruger Super Redhawk Alaskan uses the transfer bar ignition system, which makes carrying a revolver with a fully loaded cylinder absolutely safe. Until the trigger is deliberately pulled, the gun is incapable of firing and there is no risk of unintentional discharge if the gun is dropped or banged.
For iron sights, the gun wears an excellent set of adjustable rear with a black ramp front tandem that acquire the target well. This heavy duty workhorse features a handsome satin stainless finish and has a set of recoil absorbing Hogue rubber grips for maximum control when launching full powered magnums down range. Firing is accomplished via a very smooth traditional double action design that unlike other revolvers, exclusively uses high quality piano wires in its construction.
While Ruger does not provide a written warranty, the company has always promptly, professionally and courteously repaired the extremely limited number of malfunctioning firearms we've sent them. In our humble opinion, they have a better warranty and service track record than many manufacturer's offering a so-called "limited lifetime" policy (which by the way, is not your lifetime, but what that particular manufacturer perceives to be the life of the gun).
Overall, the Ruger Super Redhawk Alaskan is one of the most heavy duty revolvers ever built and is a powerful hunting handgun engineered to be a convenient, reliable sidearm to take along while dangerous game hunting.
Established in 1993, Champion Firearms is a retail gun store and indoor range located in College Station, Texas. As a brick & mortar store, we pride ourselves on customer service, quality products and our competitive pricing. Each listing is an item we actively plan to stock. While not all of our inventory is listed, the items contained on our website represent some of the most popular products we carry. Our staff has worked hard and done their best to ensure the accuracy of every listing. In the event an error has been made, Champion Firearms asks your understanding while we make it right. From all of us here at Champion Firearms, thanks for visiting our store. For assistance, please do not hesitate to let us know what we can do to help: (979) 693-9948 or [email protected]
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Cushioned Rubber Grip-recoil reducing Hogue Tamer Monogrip provides a non- slip, comfortable hold
Patented Single Spring Design- for both hammer & trigger provide a smooth, light trigger pull
Transfer Bar Safety- provides an extra measure of safety against discharge if the gun is dropped on hammer
Triple Locking Cylinder- in the front, rear & bottom, resulting in more positive and dependable operation shot after shot
Easy Sighting- with precision adjustable rear sights
Strong Extended Frame- with extra metal in top strap, sidewalls and barrel mounting areas to handle powerful big game loads
Caliber: .454 Casull / .45 Long Colt
Cylinder Capacity: 6- Rounds
Construction: Stainless Steel
Barrel Length: 2.5"
Weight: 44 ozs.
Action: Traditional Double
Warranty:"The Magnuson-Moss Act (Public Law 93-637) does not require any seller or manufacturer of a consumer product to give a written warranty. It does provide that if a written warranty is given, it must be designated as "limited" or as "full" and sets minimum standards for a full warranty. Sturm,Ruger & Company, Inc. has elected not to provide any written warranty, either "limited" or "full, rather than to attempt to comply with the provisions of the Magnuson - Moss Act and the regulation issued thereunder."
|
|
|
|
|
|
|
|
|